 |
|
|
|
| |
Center High Mount Stop Lamp
|
|
Two (2) #922 wedge base bulbs. Individual bulb output is 6 CP at .69 amps with 13 vdc supply for CHMSL. Meets SAE J1957 Center High Mounted Stop Lamp Standard for Vehicles Less Than 2032mm Overall Width (CHMSL - third brake light). When applying CHMSL to trailer, a brake module (must be obtained from a separate supplier) must be wired in series to the positive (+) CHMSL wire. Parallel wiring ensures either bulb will continue to work if one bulb burns out. Molded-in grommet to satisfy ANSI A119.2 /NFPA 501C and NEC 551-10 section c. UL listed for wet locations. Traditional screw mounting option. |
|
| Part No. |
|
Description |
|
| 30-99-114 |
|
ID Light Bar CHMSL Only with White Base |
|
| 30-99-214 |
|
ID Light Bar CHMSL Only with Black Base |
|
| 34-99-114 |
|
ID Light Bar CHMSL Only with White Base |
|
| 34-99-214 |
|
ID Light Bar CHMSL Only with Black Base |
|
| |
ID Light Bar
|
|
Three lights with acrylic lens and ABS housing mounted on a white steel bar. |
|
| Part No. |
|
Description |
|
| 34-073843 |
|
ID Light Bar Red |
|
| |
Identification Lights
|
|
Three (3) #194 wedge base bulbs. Individual bulb output is 2 CP at .27 amps with 14 vdc supply. Bulbs are spaced on 7.50" centers (to comply with FMVSS CMVSS 108). All three bulbs are recessed inside shrouds to produce an overall effect of one lens with three individual light sources (per FMVSS/CMVSS 108 requirements). Parallel wiring ensures bulbs will continue to work if one burns out. Meets SAE Recommended Practice J592 for photometric requirements. Available with red or amber lens (front and rear applications). Molded-in grommet to satisfy ANSI A119.2 /NFPA 501C and NEC 551-10 section c. UL listed for wet locations. Traditional screw mounting option. |
|
| Part No. |
|
Description |
|
| 30-99-101 |
|
Rear- Red Lens w/White Base |
|
| 30-99-102 |
|
ID Light Bar Front Amber with White Base |
|
| 30-99-201 |
|
ID Light Bar Rear Red with Black Base |
|
| 34-99-102 |
|
ID Light Bar Front Amber with White Base |
|
| |
Identification Lights w/ Halogen Spot Lights
|
|
IDENTIFICATION LIGHTS: Three (3) #194 wedge base bulbs. Individual bulb output is 2 CP at .27 amps with 14 vdc supply. Bulbs are spaced on 7.50" centers (to comply with FMVSS/CMVSS 108). All three bulbs are recessed inside shrouds to produce an overall effect of one lens with three individual light sources (per FMVSS/CMVSS 108 requirements). Meets SAE Recommended Practice J592 for photometric requirements. Parallel wiring ensures bulbs will continue to work if one burns out. Available with red lens (rear applications). HALOGEN SPOT LIGHTS: Dual MR-16, 35-Watt halogen bulbs with 38 degree beam spread. Provides enough light for the average person to be able to read a magazine at a distance of nine feet from the halogen lights. Halogen bulbs wired to BOTH lose illumination if one burns out. Easy, three-wire connection: positive wire for ID Lights, positive wire for Halogen Spots, common ground. Molded-in grommet to satisfy ANSI A119.2 /NFPA 501C and NEC 551-10 section c. UL listed for wet locations. Traditional screw mounting option. |
|
| Part No. |
|
Description |
|
| 30-99-111 |
|
ID Light Bar Rear Red with Spot with White Base |
|
| 30-99-113 |
|
ID Light Bar Rear Red with CHMSL with Spot with White Base |
|
| 30-99-211 |
|
ID Light Bar Rear Red with Spot with Black Base |
|
| 34-99-113 |
|
ID Light Bar Rear Red with CHMSL with Spot with White Base |
|
| |
LED ID Light Bar w/ Reflex Lens
|
|
This LED light bar is designed for a narrow rail surface mounting. Features include built-in reflex reflectors and stainless steel grommeted mounting holes. Prewired (supply and ground) for easy installation.
Size is 15.84" x 2.29" - Mounting holes on 14.49" centers |
|
| Part No. |
|
Description |
|
| 47-54-002 |
|
Narrow Rail ID Bar LED Red |
|
| 47-54-003 |
|
Narrow Rail ID Bar LED Amber |
|
| |
LED Waterproof ID Light Bar - Black Poly-Carb
|
|
Black poly-carb ID bar accepts LED #37 series clearance/marker modules. Prewired (supply and ring terminal ground) for easy installation.
Size is 17" x 1.46" x 1.69" |
|
| Part No. |
|
Description |
|
| 42-99-215 |
|
Waterproof ID Bar LED, Red |
|
| 47-99-215 |
|
Waterproof ID Bar LED, Red |
|
| |
LED Waterproof ID Light Bar - Stainless Steel
|
|
Light bar with three waterproof red lights. Stainless steel base with stud mounting.
14 1/4" x 1 3/16" x 1 1/16" |
|
| Part No. |
|
Description |
|
| 47-99-004 |
|
ID Light Bar LED Red |
|
| 47-99-034 |
|
ID Light Bar LED Red |
|
| |
Waterproof ID Light Bar - Black Poly-Carb
|
|
Black poly-carb ID bar accepts incandescent #37 series clearance/marker modules. |
|
| Part No. |
|
Description |
|
| 30-99-215 |
|
ID Light Bar Red |
|
| 31-99-215 |
|
ID Bar Red Incandescent |
|
| |
Replacement Parts
|
|
| Part No. |
|
Description |
|
| 30-99-040 |
|
ID Light Bar Replacement Lens Red |
|
| 30-99-042 |
|
ID Light Bar Replacement Lens Amber |
|
| 30-99-050 |
|
ID Light Bar Replacement Lens Red with Spot Light |
|
| 34-108284 |
|
ID Light Bar Replacement Lens Red |
|
|
